eZ Publish / Releases / eZ Publish Community Project 2014 / ez-publish-community-project-2014.03

ez-publish-community-project-2014.03

You are using the innovative and cutting-edge version of eZ Publish, built by eZ Systems and the eZ Community.

Requirements

Version : Release date : Requirements :
Community Project 2014.03 (10th "eZ Publish 5 build") April. 18th, 2014 Please refer to the eZ Publish Platform 5.3 requirements page.

Packages

ezpublish5_community_project-v2014.03-gpl-full.tar.bz2 102.33 MB

ezpublish5_community_project-v2014.03-gpl-full.tar.gz 113.01 MB

Upstream Download: share.ez.no/downloads/downloads/ez-publish-community-project-2014.03

Release Notes - ez-publish-community-project-2014.03

Important Information Before You Start Installing

  • This is the 12th "eZ Publish 5" build, that comprises an eZ Publish 4.x build, under the 'ezpublish_legacy' folder, at the root of your eZ Publish 5 installation. We highly recommend, however, to get acquainted with the brand new eZ Publish 5 stack :)

 

Installation

Requirements

Make sure to check the eZ Publish 2014.03 system requirements before proceeding.

Proceeding: One Major Tip

When installing on a linux/UNIX system or Windows-based system, make sure to create a Virtual Host, before starting the installation wizard (this step is highly recommended).

 

Resources

The main entry point of knowledge for you is the eZ Publish 5 Cookbook. 

Other interesting resources:

 

Feedback/reports are key, more than ever

Our community is at a turning point, where feedback is more important than ever. Should you encounter issues installing eZ Publish 5, using it, stumbling upon missing functionality, or be willing to take an active part in eZ Publish 5 development, like some already did, use the following resources:

 

Stats

  • 80 bug-fixes for registered issues
  • 155 pull-requests merged
  • 40 enhancements

See the changelog for details

 

Read The Fine Manual (and please give feedback)

You can find it here: https://confluence.ez.no/display/EZP/eZ+Publish+Documentation, notably the Cookbook for developers. Feedback appreciated on this too!

Upgrade Notes

Upgrading from eZ Publish Community Project 2014.01 to 2014.03

Important Information Before You Start

  • This is the 12th "eZ Publish 5" build, that comprises an eZ Publish 4.x build, under the 'ezpublish_legacy' folder, at the root of your eZ Publish 5 installation,
  • The upgrade procedure below must be applied to the latter, then the normal installation procedure for the eZ Publish 5 stack must be followed, 
  • Make sure to follow the Virtual Host based installation procedure in the latter to initiate the setup wizard.

 

Upgrading from 2014.01 to 2014.03

 

This section describes how to upgrade your existing eZ Publish Community Project 2014.01 installation to build 2014.03. Make sure that you have a working backup of the site before you do the actual upgrade, and make sure the installation you are performing the upgrade on is offline.

Important upgrade notes:

The procedure for upgrading from eZ Publish Community Project build 2014.01 to build 2014.03 consists of the following steps:

  • Backing up the website
  • Putting the website offline (optional)
  • Upgrading the distribution files to 2014.03
  • Upgrading custom extensions
  • Regenerate the autoload array for extensions
  • Running the upgrade scripts
  • Updating your YAML configuration
  • Clearing the caches
  • Putting the website online (optional)

 

Check for requirements

It is recommended to always verify the requirements for the new version of eZ Publish before attempting an upgrade. eZ Publish Community Project 2014.01 is compatible with PHP version 5.3.3 and above. So is eZ Publish Community Project 2014.03. For more information regarding system requirements check out "Requirements for doing a normal installation".

 

Step 1: Backing up the website

  • Filesystem set: the extension and settings folders, plus any other folder where you have put your custom developments in (e.g. design/mydesign)
  • Content set: the var/storage, var/<vardir>/storage folders, and a dump of the database (nb: for ezdb cluster mode, a dump of the storage database is needed instead of the storage folders; for ezdfs cluster mode both a dump of the storage database and a backup of the shared var folder on nfs)
  • Optional: the complete installation directory of eZ Publish, except for the var directory and for the eZFind index directory. This is mandatory if you have customized the .htaccess or config.php files

Tip: if you have many user sessions, and the session data is stored in the database, it might be a good idea to remove all data from the session table before backing it up
Tip: in ezdb and ezdfs cluster modes, it is a good idea to clear all caches before dumping the storage database, as it is not easy to only backup storage and not caches

 

Step 2: Putting the website offline (optional)

This step is recommended but not mandatory

  • Put the public website offline and set up a courtesy page to prevent end users from accessing the website while you upgrade. This involves generally modifying the webserver configuration. Make sure you have a different vhost available to access the public website using a private IP address or hostname during the upgrade process
  • Disable execution of eZ Publish cronjobs

 

Step 3: Upgrading the distribution files

The easiest way to upgrade the distribution files is to unpack eZ Publish 2014.03 to a separate directory and then copy into it the directories that contain site-specific files from the existing installation. Make sure that you copy the following directories:

  • design/<mydesign>
  • design/<mydesign_admin>
  • var
  • settings/siteaccess
  • settings/override

Replace "mydesign" and "mydesign_admin" with the actual names of your designs.

Important note: Because the new directory has replaced the original directory, the directory permissions need to be fixed. Use the following commands to do this.

(You have the choice between Shell commands or Alternative shell commands):

  • Shell commands

These shell commands will give proper permission to the web server:

cd </path/to/your/eZ/Publish/directory>cd ezpublish_legacychmod -R a+rwx design extension settings var
  • Alternative shell commands

 These commands will setup the permission more correctly, but require knowledge about the user account used for running the web server process.cd </path/to/your/eZ/Publish/directory>

cd </path/to/your/eZ/Publish/directory>cd ezpublish_legacychmod -R og+rwx design extension settings varchown -R <webuser>:<webusergroup> design extension settings var

 

Step 4: Custom extensions

If you are using custom extensions, the sub-directories inside the "extension" directory will also have to be copied. However, make sure that you do not overwrite any extensions that are included in the eZ Publish 2014.03 tarball, which are currently:

Bundled and enabled

  • ezautosave-5.3.0-beta1
  • ezcomments-5.3.0-beta1
  • ezformtoken-5.3.0-beta1
  • ezie-5.3.0-beta1
  • ezjscore-5.3.0-beta1
  • ezmultiupload-5.3.0-beta1
  • ezodf-5.3.0-beta1
  • ezoe-5.3.0-beta1
  • ezprestapiprovider-5.3.0-beta1
  • eztags-1.3.0-dev

Bundled but not enabled

  • ezfind-5.3.0-beta1
  • ezscriptmonitor-5.3.0-beta1

Optional installation (depending on the package chosen during the installation wizard)

  • ezdemo-5.3.0-beta1
  • ezdemodesign-5.3.0-beta1
  • ezflow-5.3.0-beta1
  • ezgmaplocation-5.3.0-beta1
  • ezstarrating-5.3.0-beta1
  • ezwebin-5.3.0-beta1
  • ezwt-5.3.0-beta1

 

 

Step 5: Regenerate the autoload array for extensions

To regenerate the autoload array, execute the following script from the root of your eZ Publish installation:

cd </path/to/your/eZ/Publish/directory>cd ezpublish_legacyphp bin/php/ezpgenerateautoloads.php --extension

 

Step 7: Running the upgrade scripts

Run the two following scripts:

cd </path/to/your/eZ/Publish/directory>cd ezpublish_legacyphp update/common/scripts/5.3/recreateimagesreferences.php -s<siteaccess>php update/common/scripts/5.3/updatenodeassignmentparentremoteids.php -s<siteaccess><span style="font-size: 1.1em;"> </span>

 

Step 8: Updating your YAML configuration

Please refer to these upgrade instructions: https://github.com/ezsystems/ezpublish-kernel/blob/master/doc/upgrade/5.3.md

 

Step 6: Clearing the caches

Whenever an eZ Publish website is upgraded, all caches must be cleared in a proper way. This should be done from the root directory of your eZ Publish installation:

cd </path/to/your/eZ/Publish/directory>cd ezpublish_legacyphp bin/php/ezcache.php --clear-all --purge

Tip : Purging ensures that the caches are physically removed. When the "--purge" parameter is not specified, the caches will be expired but not removed.

Sometimes the script is unable to clear all cache files because of restrictive file/directory permission settings. Make sure that all cache files have been cleared by inspecting the contents of the various cache sub-directories within the "var" directory (typically the "var/cache/" and "var/<name_of_siteaccess>/cache/" directories). If there are any cache files left, you need to remove them manually.

 

Step 9: Putting the website back online

This step is optional, and is only needed if you put the website offline at step 2

  • warm up the template cache by pre-compiling template files. This should be done from the root directory of your eZ Publish installation:
cd </path/to/your/eZ/Publish/directory>cd ezpublish_legacyphp bin/php/eztc.php --wwwdir=<value> --index-file=<value>
  • re-enable the cronjobs
  • warm up the content cache: use a tool such as curl or wget that will navigate the website to force eZPublish to generate the view cache for all content
  • change the webserver / firewall configuration to allow public access to your website again
  • Backing up the website
  • Putting the website offline (optional)
  • Upgrading the database
  • Upgrading the distribution files to 2014.03
  • Upgrading custom extensions
  • Regenerate the autoload array for extensions
  • Clearing the caches
  • Putting the website online (optional)

 

Step 8 (optional): Authentication through Symfony

  • In ezpublish/config/security.yml, you must remove ezpublish: true from ezpublish_front firewall.
  • In ezpublish/config/routing.yml, you must add login, login_check and logout routes (see above in [Configuration][])
  • In your templates, change your links pointing to /user/login and /user/logout to appropriate login/login_check/logout routes:

Before:

<span><a href="{{ path( 'ez_legacy', {'module_uri': '/user/login'} ) }}"></span>Login<span></a></span><span><form action="{{ path( 'ez_legacy', {'module_uri': '/user/login'} ) }}" method="post"></span><span><a href="{{ path( 'ez_legacy', {'module_uri': '/user/logout'} ) }}"></span>Logout<span></a></span>

 

After:

<span><a href="{{ path( 'login' ) }}"></span>Login<span></a></span><span><form action="{{ path( 'login_check' ) }}" method="post"></span><span><a href="{{ path( 'logout' ) }}"></span>Logout<span></a></span>

 

For more information: https://github.com/ezsystems/ezpublish-kernel/blob/master/doc/specifications/security/authentication_symfony.md#upgrade-notes

 

 

Changelog

Changelog from Community Project 2014.01 to Community Project 2014.03

Bugfixes

eZ Publish Kernel & APIs
  • EZP-22277: eZ Publish Production log is too verbose
  • EZP-22378: Reflect new repository configuration in SetupWizard

eZ Publish Legacy Stack (LS)
  • EZP-18990: add missing changelogs
  • EZP-20570: ezcsvimport uses the storage-dir as filename if an ezimage is empty
  • EZP-20815: Enter key in setup wizard activates wrong action: back instead of next
  • EZP-21124: Checkbox custom attributes on custom tags are not stored
  • EZP-21802: Execute test when one of the image libs is present
  • EZP-22027: location/url alias SPI cache not updated.
  • EZP-22032: don't create an empty ezmedia row
  • EZP-22124: inline image alignment is not respected
  • EZP-22131: handle exceptions in legacy kernel callback
  • EZP-22204: Make sure first Module/View AccessMode != 'keep' is final
  • EZP-22221: Modified alt. pagelayout to use ezjscore
  • EZP-22313: HTML pasted into literal ends up outside literal tag
  • EZP-22321: Fix ezjscore cache not cleared on DFS
  • EZP-22372: Workflow cannot be edited if you remove a user and/or a group
  • EZP-22399: : When calling the method eZContentObject::relatedObjectCount with the IgnoreVisibility parameter, the count is not correct
  • EZP-22414: Session is lost when redirecting from a legacy module
  • EZP-22426: DetectMobileDevice redirection fails for URI
  • EZP-22435: Set a default checkbox value so it is saved when the editor is disabled and re-enabled
  • EZP-22446: AllowedRedirectHosts fix won't work with ports
  • EZP-22447: Removed content still shows on frontend until http cache expires
  • EZP-22466: adv. obj. relation list edits not saved
  • EZP-22472: Incorrect handling of dfs cache error
  • EZP-22480: Object creation does not respect attribute constraints in ezoe
  • EZP-22487: paragraph drops its class when alignment is applied in ezoe
  • EZP-22504: Notice: Undefined variable: moduleName in ezfunctionhandler.php
  • EZP-22509: HTML pasted into literal ends up outside literal tag when the source is not plaintext
  • EZP-22519: Duplicating a content version results in an empty draft if maximum versions is reached
  • EZP-22569: Removed Location still shows on frontend until http cache expires
  • EZP-22579: Function call recursion on eZIni cache generation with PHP 5.5
  • EZP-22656: PHP Notice: Undefined property: eZSOAPClient::$TimeOut in /var/www/html/ezpublish5/ezpublish_legacy/lib/ezsoap/classes/ezsoapclient.php on line 167
  • EZP-22660: : mtime generated empty
  • EZP-2881: AcceptPathInfo Test bug

eZ Publish 5
  • EZP-20505: Additional check for empty fileName on field template.
  • EZP-20575: Setup wizard fails to generate yml config when using kickstart.ini
  • EZP-20682: Fixed update user rest doc error
  • EZP-20898: Fixed legacy URL generation irt _fragment
  • EZP-20923: Make legacy ConfigurationConverter dump Stash settings with crc32 keyHashFunction
  • EZP-21104: Making session while already logged must give 409
  • EZP-21207: Creating a view with the wrong schema must return an error 400 instead of error 500
  • EZP-21344: [doc] updating documentation to reflect real behavior
  • EZP-21681: Implement ContentTypeList without Identifier or RemoteId using sort's parameters
  • EZP-21751: kernel::runcallback() does not always return to correct directory
  • EZP-21969: Added test for BinaryFileUpdateStruct
  • EZP-21977: Fixed output binary file size display
  • EZP-21991: UserHash should be cached tied to user session id, not user cookies
  • EZP-22055: A partial pathString loads a REST location/group
  • EZP-22062: Fixed error 500 on /api/ezp/v2/content/locations/1
  • EZP-22098: Made sure Float/integer value of 0 !== false
  • EZP-22131: handle exceptions in legacy kernel callback
  • EZP-22180: complete integration test cases for loading relations
  • EZP-22198: fix unhide location signal
  • EZP-22235: windows IO Exception "
  • EZP-22272: Image alias generator throws exception if original file is not present
  • EZP-22290: Avoid PHP notice because of uninitialized variable
  • EZP-22353: Travis database error on ezpublish-community
  • EZP-22360: clear use role cache when moving locations from legacy
  • EZP-22378: Reflect new repository configuration in SetupWizard
  • EZP-22387: Error rendering a page block with trashed content
  • EZP-22397: Page converter major testing and debug
  • EZP-22404: resource paths are relative to kernel.root_dir
  • EZP-22409: Creating an object with relationlist fails when target class is being edited.
  • EZP-22414: Session is lost when redirecting from a legacy module
  • EZP-22419: Clearing cache in CLI when eZ Publish is not yet installed leads to database error
  • EZP-22427: ez_is_field_empty broken on Object Relation fields
  • EZP-22430: redirect for custom forwarding Location alias
  • EZP-22437: JSON decode result is not checked in the input parser
  • EZP-22456: check all potential user groups for inheritance
  • EZP-22471: do not join with ezcontentobject_tree on version number
  • EZP-22474: Preview controller authorization checks for non-existing function "content/versionview". Signed-off-by: Markus Mahner <[email protected]>
  • EZP-22507: Unable to run any php ezpublish/console commands on builds
  • EZP-22513: Exception not thrown when twig template does not exist
  • EZP-22516: make uniformly testable
  • EZP-22525: On preview, JS and CSS is broken when using host-match mapping
  • EZP-22531: Unable to install eZ Publish 5.3-dev using dev environment
  • EZP-22542: update test for priority sorting
  • EZP-22625: Circular reference on ezsettings.default.session_name
  • EZP-22632: Made request optional in CachedValue visitor
  • EZP-22634: URIText SiteAccess matcher doesn't implement URILexer

Enhancements

eZ Publish Kernel & APIs
  • EZP-22110: Loads DemoBundle routing.yml In order to demo ajax requests in the DemoBundle we need to be able to add custom routes.
  • EZP-22152: Added EzPublishDebugBundle
  • EZP-22210: Injected kernel into EzPublishLegacyBundle
  • EZP-22279: Added DoctrineBundle dependency
  • EZP-22415: Upgrade dependency on Stash bundle to 0.3

eZ Publish Legacy Stack (LS)
  • EZP-19695: Enabling non automatic conversion of siteaccess names
  • EZP-21775: Implement eZClusterFileHandlerInterface
  • EZP-21966: eZUser now supports basic drafts""
  • EZP-22210: Syntax
  • EZP-22260: fix casting of remote_id
  • EZP-22318: Allow to deactivate settings
  • EZP-22592: Setup wizard should check for php-xsl and php-intl

eZ Publish 5
  • EZP-20305: Fixed phpDoc in MatcherBuilder
  • EZP-21294: UrlAlias Criterion
  • EZP-21315: added embed tags to schemas
  • EZP-21319: allow mulitple titles on the same level
  • EZP-21387: implemented embed views
  • EZP-21893: handle matching always available Content
  • EZP-21980: Fixed IO\Handler\Filesystem::update()
  • EZP-22015: fixed argument mutation
  • EZP-22065: Make SiteAccess a synchronized service
  • EZP-22105: Location search API
  • EZP-22146: fixed: assert assignment type
  • EZP-22151: sync with interim changes
  • EZP-22152: Added dedicated EzPublishDebugBundle
  • EZP-22163: Implemented user/sessions/<id>/refresh plus refactoring of user/sessions. Specifications have also been updated
  • EZP-22193: Added dedicated controller
  • EZP-22210: Added specifications for legacy bundles
  • EZP-22217: new REST ressource returning countryList
  • EZP-22260: fix using wrong node assignment column for Location remote id
  • EZP-22279: Added dependency on DoctrineBundle
  • EZP-22315: Use ez_is_field_empty to do the checks in content_fields.html.twig
  • EZP-22318: Make Symfony session options SiteAccess aware
  • EZP-22337: Hidden state on Locations is not taken into account in ViewController
  • EZP-22415: Upgrade dependency to stash bundle to 0.3
  • EZP-22443: replace interleaving to make external interleaving possible
  • EZP-22479: SiteAccessLimitation support for use in new login system
  • EZP-22560: Deprecate the Regex SiteAccess matchers
  • EZP-22562: Create missing value object visitors and input parsers services
  • EZP-22597: Use composition on extended FragmentRenderers

Pull requests

eZ Publish Kernel & APIs
  • 85: from ezsystems
  • 96: from ezsystems
  • 100: from cleverti
  • 103: from cleverti
  • 104: from cleverti
  • 106: from ezsystems
  • 107: from cleverti
  • 108: from cleverti
  • 109: from ezsystems
  • 113: from ezsystems
  • 114: from ezsystems
  • 115: from MLoureiro
  • 117: from cleverti
  • 124: from ezsystems
  • 125: from MLoureiro

eZ Publish Legacy Stack (LS)
  • 575: from charlycoste
  • 790: from jeromegamez
  • 804: from jeromegamez
  • 838: from ezsystems
  • 839: from joaoinacio
  • 840: from ezsystems
  • 855: from ezsystems
  • 857: from crevillo
  • 866: from joaoinacio
  • 869: from dymissy
  • 877: from ezsystems
  • 878: from crevillo
  • 879: from ezsystems
  • 880: from ezsystems
  • 882: from pitpit
  • 883: from ezsystems
  • 884: from crevillo
  • 885: from ezsystems
  • 886: from peterkeung
  • 889: from achasseux
  • 890: from ezsystems
  • 891: from gggeek
  • 892: from ezsystems
  • 894: from ezsystems
  • 895: from guillaumelecerf
  • 896: from ezsystems
  • 897: from peterkeung
  • 898: from ezsystems
  • 901: from joaoinacio
  • 904: from ezsystems
  • 905: from ezsystems
  • 908: from ezsystems
  • 909: from glye
  • 910: from trolek
  • 911: from ezsystems
  • 912: from ezsystems
  • 913: from ezsystems
  • 914: from ezsystems
  • 915: from ezsystems
  • 918: from ezsystems
  • 919: from ezsystems
  • 920: from glye
  • 921: from peterkeung
  • 922: from ezsystems
  • 924: from ezsystems
  • 925: from ezsystems
  • 927: from ezsystems
  • 928: from emodric
  • 929: from ezsystems
  • 930: from ezsystems
  • 932: from ezsystems
  • 933: from pedroresende
  • 934: from ezsystems
  • 935: from Plopix

eZ Publish 5
  • 594: from ezsystems
  • 626: from ezsystems
  • 646: from StephaneDiot
  • 651: from ezsystems
  • 668: from StephaneDiot
  • 669: from ezsystems
  • 681: from idriss69
  • 693: from StephaneDiot
  • 695: from ezsystems
  • 697: from ezsystems
  • 701: from ezsystems
  • 704: from ezsystems
  • 705: from StephaneDiot
  • 706: from crevillo
  • 710: from ezsystems
  • 711: from ezsystems
  • 712: from ezsystems
  • 714: from jeromegamez
  • 717: from ezsystems
  • 718: from ezsystems
  • 719: from ezsystems
  • 720: from ezsystems
  • 722: from joaoinacio
  • 723: from ezsystems
  • 724: from pborreli
  • 728: from ezsystems
  • 729: from ezsystems
  • 730: from ezsystems
  • 733: from ezsystems
  • 734: from ezsystems
  • 736: from ezsystems
  • 737: from crevillo
  • 738: from crevillo
  • 739: from crevillo
  • 740: from ezsystems
  • 741: from hhamon
  • 742: from crevillo
  • 743: from ezsystems
  • 744: from joaoinacio
  • 745: from cleverti
  • 749: from joaoinacio
  • 751: from joaoinacio
  • 752: from ezsystems
  • 753: from StephaneDiot
  • 754: from idriss69
  • 755: from ezsystems
  • 756: from ezsystems
  • 758: from ezsystems
  • 759: from cleverti
  • 760: from gabriperego
  • 761: from crevillo
  • 764: from ezsystems
  • 765: from ezsystems
  • 766: from bdunogier
  • 767: from ezsystems
  • 768: from ezsystems
  • 769: from ezsystems
  • 770: from ezsystems
  • 771: from ezsystems
  • 772: from mere-teresa
  • 773: from idriss69
  • 774: from ezsystems
  • 775: from ezsystems
  • 776: from rolebi
  • 778: from itagenten
  • 779: from ezsystems
  • 780: from ezsystems
  • 782: from ezsystems
  • 783: from cleverti
  • 785: from ezsystems
  • 787: from ezsystems
  • 788: from cleverti
  • 791: from stof
  • 793: from ezsystems
  • 794: from MLoureiro
  • 795: from MLoureiro
  • 796: from MLoureiro
  • 797: from MLoureiro
  • 799: from ezsystems
  • 802: from ezsystems
  • 804: from ezsystems
  • 805: from ezsystems
  • 806: from MLoureiro
  • 807: from MLoureiro

Miscellaneous

eZ Publish Kernel & APIs
  • Git Install Doc: Composer before folder rights
  • BDD: big refactor on BrowserContext to simplify maintenance
  • BDD: add get repository function
  • [Behat] Move priorSearchPhrase prop to BrowserContext
  • [Behat] Add temp class alias to be able to get tests running
  • BDD: update single identifier sentences with ""
  • BDD: add create ContentTypeGroup feature file and sentences
  • Add dependency on legacy so project can be installed purly with composer
  • Made interactive debugging more convenient
  • Added Eclipse project files to .gitignore
  • BDD DemoContent: Added common methods to context files
  • Revert "Remove stash-bundle from main composer.json as it's already present in ezpublish-kernel's"
  • Upgraded egulias/listeners-debug-command-bundle to ~1.9
  • Remove stash-bundle from main composer.json as it's already present in ezpublish-kernel's
  • Fix the bundle class name to actually correspond to the bundle
  • Updated req. nelmio/cors-bundle to ~1.3
  • Fix Typos
  • routing.yml: s/pattern/path
  • Fix cs issues in bin/.travis/ezrouter.php
  • Fix missing brackets in if conditions
  • Fix Coding Standards
  • Added I am logged in as "<user>" sentence

eZ Publish Legacy Stack (LS)
  • Enabled asynchronous publishing from preview
  • Fix debug output HTML validation when using HTML5 doctype
  • Merge branch 'EZP-22466-advanced_object_relation_list_editing-take_2'
  • Fix community dashboard widget month display
  • Improved the plain text conversion in Firefox when the source is a <pre> tag content
  • Fixed: make sure long lines inside literal tag do not overflow the literal area
  • Fix EZP-22423: Update YUI to 3.15
  • Fixed EZP-21959: Security: Siteaccess matching is loose, in legacy stack
  • Enhance eztemplatecheck.php: display error details for invalid template
  • Support textarea custom attributes in the Online Editor
  • Merge branch 'master', remote-tracking branch 'upstream/master'
  • Fix [EZP-22358]: SiteAccessRules setting doesn't work well in the Symfony Stack
  • Ignoring siteaccess cache and log sub-directories
  • Implemented merged injected-settings
  • Fix [EZP-22328] Inline doc in logfile.ini can lead to error in updateviewcount script
  • Fixed regression: wizard sets password to publish
  • Fixed 'PHP Notice: Undefined index: REQUEST_METHOD' notice in unit test
  • Fixed 'PHP Warning: strpos(): Empty delimiter' warning in unit test
  • [EZP-22153] eZDemo install does not respect "leave data and do nothing in the db" selection
  • Update phpdoc on ezpEvent:filter to reflect actual implementation

eZ Publish 5
  • Fix minor cs stuff
  • Removed unused use statement
  • Removed unused variables
  • Fixed WebsiteToolbarController being executable
  • BDD: update the BrowserContext namespace
  • Removed @return void in SiteAccess matchers
  • Removed useless @covers in SiteAccess matcher tests
  • [Doc] Add deprecation doc for deprecated SortClauses and Criteria
  • Un-deprecate Location based Content criteria that works as intended
  • CS fix in GuzzleClient.php
  • SetupWizard: fix bdd sentence to press buton
  • BDD: add rest internal sentences (interface + implementation)
  • Move REST Input Parser to REST/Common
  • Revert "[eZPublishLegacyBundle] refactored the LegacyResponseManager to move some code into the LegacyResponse class where it is more appropriate."
  • Revert "[EzPublishLegacyBundle] renamed LegacyResponse::setHeaders() to LegacyResponse::setLegacyHeaders()"
  • Merge branch 'EZP-20682-rest_update_user_doc_fix'
  • BDD RestClient: add basic REST client for REST testing
  • BDD: add object 'manipulation'
  • BDD: add rest server FeatureContext
  • Fixed missing ";" in EzPublishRestExtension
  • Add bc doc on RESTv2 POST /user/sessions changes (cherry picked from commit eb842709ebe1dd99d48084d7395d9a42ac511b1d)
  • Add tracking of the prepended config file
  • Made REST output indenting optional
  • SetupWizard: add 'System check' step for travis
  • phpdoc fix
  • BDD: change database credentials to 'ezp' with 'ezp'
  • BDD: remove socket from DB step (to work on pgsql also)
  • BDD: add coverage for each package and their version
  • BDD: add SetupWizard tests for Demo with and without content
  • Update LoaderStringTest.php
  • Renamed EzLinkToHtml5 to Link converter
  • Fixed outdated docblock comments
  • Minor cleanup in fieldtypes.yml to make it clear ezrecommendation is null type
  • Update multiple_user_providers.md
  • Update repository_config.md
  • Update doctrine_bundle.md
  • Remove @covers use in Limitation tests as asked for in #775
  • Fix overlapped Identity name definition
  • Update and rename doctrine-dbal.rst to doctrine-dbal.md
  • Fixed REST API specifications after fixing EZP-21312
  • Removed covers annotations causing failures on CI
  • Fixed exception message
  • [SensioLabsInsight]: Fixed unused variable in ConfigurationConverter
  • [SensioLabsInsight]: Fixed unsused use statements
  • [SensioLabsInsight]: Fixed unreachable test
  • Typo in default vars of ezgmaplocation_field
  • Added possibility to control draggable option on ezgmaplocation_field
  • Fixed a possible error in ContentViewLayoutDecorator
  • Fix get database parameters ny using ezpublish.connection
  • Simplify .travis.yml test matrix & add inline doc to explain it
  • Added Regression Test for EZP-22409
  • Added 'is_hidden' and 'priority' columns to 'eznode_assignement' table
  • Fix: suggestion Array uses 'driverOptions' as one of its key, but this option is not recognized
  • Fixed unused use statements (yes again !)
  • Fixed non-executing tests with Solr
  • Changed "or" logical operator usage to "||"
  • Fixed unused use statements
  • Update link to new DB connection handler
  • Simplified inivisible Location condition
  • [EzPublishLegacyBundle] renamed LegacyResponse::setHeaders() to LegacyResponse::setLegacyHeaders()
  • [eZPublishLegacyBundle] refactored the LegacyResponseManager to move some code into the LegacyResponse class where it is more appropriate.
  • Added getConnection() to DatabaseHandler interface
  • Fix [EZP-22358]: SiteAccessRules setting doesn't work well in the Symfony Stack
  • Fixed [EZP-22356]: Unused use statements in ContentService
  • Fixed [EZP-22357]: ContentSearchAdapter and ContentSearchHitAdapter have some errors in inline documentation
  • Added datadumper script used to generate initial demo_data.php
  • Fixed unused use statement
  • Bumped CorsBundle version to 1.3.*
  • Update .travis.yml to use Solr 4.6.1
  • Changed dependency on Symfony to 2.3.*
  • Remove InMemory Persistence handler
  • Fix EZP-22225; Publishing content in a symfony command throws InactiveScopeException
  • Fixed minor mistakes in io.yml
  • Improve Query and MapLocation criterion and sort clause docs
  • Fix missing UrlAlias criterion removal from 6dca23d1c374562d8cb4867e46479c59c5890b83 reported by @crevillo
  • Fixed RichText conversion failure on CI
  • Add Postgres related connection code
  • Add more docblocks and missing getName() method on DatabaseHandler
  • Add docblocks for some new classes that were missing them
  • Fix some bugs in test setup to run against MySQL and PostgreSQL
  • Fix an exception referencing ezcQueryVariableParameterException
  • Fix more references to ezcDbException to use DBALException in ExceptionConversion
  • Fix references to ezcQuery to use new eZ\Publish\Core\Persistence\Database abstraction.
  • Fix ExceptionConversion Gateways
  • Change eZ\Publish\Core\Persistence\Legacy\Handler to accept a DatabaseHandler and change services.ini to provide Doctrine as implementation. Adjust tests.
  • Add ConnectionHandler::createFromDSN() method with tests for the travis connection data.
  • Fix last issues to make integration tests run on SQLite
  • Allow delete without WHERE as its actually used to empty the trash.
  • Add SqliteConnectionHandler + fix bug in DoctrineExpression.
  • More small adjustments to new API
  • ezcQuerySelect => SelectQuery replacements
  • Fix one more reference to EzcDbHandler and implement binding valudes.
  • More EzcDbHandler => DatabaseHandler replacements
  • Active doctrine to see the breakages.
  • Replace EzcDatabase API to accept DatabaseHandlers and make EzcDbHandler a DatabaseHandler that fullfills the API.
  • Added Expression support.
  • Add DeleteQuery for Doctrine implementation
  • Add UpdateQuery Doctrine implementation
  • Copy Subselect support from Zeta Components
  • Implementation for SelectDoctrineQuery and tests for the SQL generation (not execution yet).
  • Missing docblock documentation
  • Remove TableGateway API
  • Revert "Showing one insert+select statements with Doctrine API, for evaluation of refactoring towards DBAL API or writing abstraction that mimics ez Query APIs."
  • Add Interfaces for query api from Zeta Components database
  • Specify both refactoring approaches explicitly.
  • Showing one insert+select statements with Doctrine API, for evaluation of refactoring towards DBAL API or writing abstraction that mimics ez Query APIs.
  • Introduce DoctrineDbalGateway accepting only the connection now, adjusting the Handler to provide it.
  • Document TableGateway
  • Introduce TableGateway abstraction + integration tests
  • Introduce doctrine/dbal ~2.4 dependency
  • API example for TableGateways to be introduced as abstraction.
  • Specification for Refactoring towards Doctrine DBAL
  • Merge branch 'dev-toolbar' of git://github.com/dspe/ezp-next into dspe-dev-toolbar
  • Rename SPIPersistenceDataCollector to EzPublishDataCollector
  • Add support for legacy template
  • Add Template List to Collector

Tags

eZ Publish 2014